Anker – Wireless Chargers – 323 PowerWave Magnetic 2-in-1 Wireless Charger and Stand – A2543

USER MANUAL

LED Indicator

WARNINGS:

• This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.
• Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
• Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power.
  It is recommended that you charge your device in environments with temperatures below 35°C / 95°F.
• Please refer to the electrical and safety information on the bottom before installing or operating the product.
  • Avoid dropping.
  • Do not disassemble.
  • Do not expose to liquids.
  • For the safest and fastest charge, use original or certified cables.
  • This product is suitable for moderate climates only.
  • The maximum ambient temperature during use of this product must not exceed 40°C.
  • Open flame sources, such as candles, must not be placed on this product.
  • Only use a dry cloth or brush to clean this product.

  FCC Statement

  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio / TV technician for help.

  Radiation Exposure Statement

  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.

  Product Name: PowerWave Magnetic 2-in-1 Stand Lite
  Model: A2543

  The following importer is the responsible party (for FCC matters only).

  Company Name: Fantasia Trading LLC
  Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
  Telephone: +1 800 988 7973

  IC Statement

  This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

  RSS-Gen Issue 5 March 2019
  This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  (1) This device may not cause interference.
  (2) This device must accept any interference, including interference that may cause undesired operation of the device.

  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  RF exposure statement:
  The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

  This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
  This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

  Declaration of Conformity
  Hereby, Anker Innovations Limited declares that the product type A2543 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
  https://www.anker.com/

  GB Declaration of Conformity
  Hereby, Anker Innovations Limited declares that the product type A2543 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com

  Anker Innovations Limited |

  Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

  Anker Innovations Deutschland GmbH |

  Georg-Muche-Strasse 3, 80807 Munich, Germany

  Anker Technology (UK) Ltd |

  Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

  UK / CA

  This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

  This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out.

  Specifications

  Input	5V 3A / 9V 2A / 12V 2A
  Output	5W / 7.5W / 10W (7.5W for iPhone)
  Operating Temperature	-10° C – 40° C
  Radiated H-Field	-45.76dB μA/m(@10m)
  TX/RX Frequency Range	110-205KHz (only for EU and UK)